VAG DUOJET-P automatisk avluftningsventil med hög kapacitet till vatten

VAG DUOJET-P automatisk avluftningsventil med hög kapacitet till vatten

VAG DUOJET®-P automatisk avluftningsventil med med 40 procent högre kapacitet än en standardavluftningsventil. Mjuktätande fullflödesventil med en kammare i kompakt design. Med dubbla utlopp och tre funktioner; släpper ut luft då ledning fylls, släpper in luft då ledning töms samt avluftar under drift. Korrosionsbeständig tack vare interna delar av rostfritt stål och flottör av plast.
Ventilen ger en säker och pålitlig drift även vid höga lufthastigheter - upp till ljudets hastighet kan tillåtas. Lämplig för användning vid vattenbehandling och -distribution, i dammar, kraftverk och industrin.

PN: 16/25 - DN: 50...150

Downloads
Technical datasheet
Operating and maintenance instructions
Drawings DUOJET®_DXF 
Drawings DUOJET®_DWG 

Har du några frågor?

Fredrik Ekeroth
Solution Seller
Tel. 054-57 92 06

Fredrik.Ekeroth@askalon.se

Fredrik Malmström
Solution Seller
Tel. 040-33 02 33

Fredrik.Malmstrom@askalon.se

Johan Mattsson
Account Manager Infrastructure
Tel. 054-57 92 52

Johan.Mattsson@askalon.se

  • Sealing system/standard: Resilient seated
  • Single chamber air valve in compact design
  • Very high discharge capacity up to sonic velocity due to stabilised floater
  • Venting function:
    • Small orifice to release low quantities of air during operation under pressure
    • Large orifice to vent high quantities of air during draining the pipeline
    • Large orifice to release high quantities of air during filling the pipeline
  • Outlet female threaded: acc. to DIN ISO 228
  • With flange end acc. to EN 1092-2
  • Minimum operation pressure: 0.3 bar
  • The full-bore design with nominal diameter equal inlet, passage and outlet flow area increase the performance about double  higher than the standard Duojet valve.
  • Triple function air valve
  • Internally and externally epoxy coated acc. to GSK guidelines
  • Body: Ductile iron EN-GJS-400-15 (GGG-40)
  • Bonnet: Stainless steel 1.4308
  • Inner parts: Stainless steel 1.4541
  • Float: Plastic polypropylene
  • Sealing: EPDM
  • Bonnet bolts: Stainless steel A2 (DIN EN ISO 3506)

Frågor på produkten?

Fyll i formuläret nedan så kontaktar vi dig och svarar på dina frågor