Home/Tuotteet/Fisher 3582 Pneumatic Single-Acting Positioner

Fisher 3582 Pneumatic Single-Acting Positioner

Fisher 3582™ pneumatic valve positioners are used with diaphragm-actuated, sliding-stem control valve assemblies. This pneumatic valve positioner receives a pneumatic input signal from a control device and modulates the supply pressure to the control valve actuator, providing an accurate valve stem position that is proportional to the pneumatic input signal.

Fisher JALOSTAMO

Product Bulletin Fisher 3582 and 3582i Positioners, 582i Electro-pneumatic converter, and 3583 valve stem position transmitter
Instruction manual Fisher 3582 and 3582i Positioners, 582i Electro-pneumatic converter, and 3583 valve stem position transmitter

Any questions?

Taneli Luhanko
Inside Sales Engineer
Phone. 0207 416 202
Mob. 040 757 4208

Taneli.Luhanko@askalon.fi

Tekniset tiedot
Ominaisuudet
Product request

Area Classification	ATEX Group II Category 2 Gas and Dust, CUTR for Groups II/III Category 2 Equipment
Certifications	ATEX, CUTR, PED
Communication Protocol	3-15 or 6-30 psi, 0.2 -1.0 or 0.4 -2.0 bar Pneumatic Signal
Diagnostics	No
Input Signal	Pneumatic
Max Outlet Pressure	50 psi
Mounting Type	Actuator Mounted
Operating Temperature	Standard Temperature, High Temperature
Position Control	Modulating
Safety Certification	NIL
Supply Media	Air, Natural Gas

The range of the adjustable zero and span permits the use of all standard input signals, including split ranges.
Because units from one positioner family can be used in a variety of control applications, basic spare parts inventory requirements are simplified and fewer spare parts are needed to support a plant-wide positioner applications base.
With the cover removed, zero and span adjustments are easily accessible and can be made with a screw driver and spanner.
Changes in supply pressure and valve load have minimal effect on positioner operation.
Case, components, and gasket materials are able to withstand harsh environments. Positioner bleed air purges internal parts for additional protection..
Simple adjustments permit switching between direct and reverse action.
To support diagnostic testing of valve/actuator/positioner packages with the FlowScanner™ valve diagnostic system, connectors, piping, and other hardware can be installed between the positioner and the actuator.

Brands

Fisher 3582 Pneumatic Single-Acting Positioner

Questions about the product?