Phone. +46 54-57 92 00
Email: sales@askalon.se

About AskalonCareerNewsContact

Askalon AB
På Dansk In English Suomeksi På Svenska

Home/Products/VAG ZETA with handwheel - wastewater

VAG ZETA with handwheel - wastewater

VAG ZETA with handwheel - wastewater

Resilient-seated knife-gate valve in fully flanged design, sealing in both flow directions, with integrated scraper system and free flow passage with control orifice for precise regulation. Due to the integrated stainless-steel control orifice with optimised control characteristic and free bottom passage, this valve can be used as a control valve. Suitable for use in waste-water applications, in power plants and in industry.

PN: 10 - DN: 100...600

Downloads
Technical datasheet
Operating and maintenance instructions

VAG WATER & SEVAGE

Any questions?

Fredrik Ekeroth
Solution Seller
Phone. +46 54-57 92 06

Fredrik.Ekeroth@askalon.se

Fredrik Malmström
Solution Seller
Phone. +46 40-33 02 33

Fredrik.Malmstrom@askalon.se

Johan Mattsson
Account Manager Infrastructure
Phone. +46 54-57 92 52

Johan.Mattsson@askalon.se

Frank Kirk Hansen
Account Manager
Phone. +45 4053 6511

Frank.Kirk@askalon.dk

Kenn Gerwien
Account Manager
Phone. +45 2346 5513

Kenn.Gerwien@askalon.dk

  • Face-to-face length: acc. to EN 558, basic series 20 (DIN 3202 / K1)
  • With flange end acc. to EN 1092-2, PN 10
  • Full-flange design, both as wafer type and for pipeline end installation, without additional counter flange at full differential pressure
  • Any installation position possible
  • Leakproof from both flow directions
  • Horizontal sealing adjustable during operation and replaceable with the valve installed in the pipeline
  • Scraper installed on both sides of the plate to clean the knife
  • With integrated VAG waste water control insert
  • With mechanical position indicator of the knife
  • Cast iron parts: Epoxy coated
  • Operating kit: With handwheel
  • Stem: Stainless steel 1.4057 (DN 50-350)/stainless steel 1.4021 (DN 400-600)
  • Stem nut: Brass
  • Body parts, bearing plate and gland: Cast iron EN-GJL-250 (GG-25)
  • U-sealing and horizontal sealing: Elastomer (NBR)
  • Yoke - sheet metal construction: Stainless steel A2
  • Control insert: Stainless steel A4
  • All connecting parts: stainless steel A2 (DIN EN ISO 3506)
  • Knife (DN 50-350): Stainless steel A4
  • Knife (DN 400-600): Stainless steel A2

Questions about the product?

Fill out the form below and we will contact you with answers to your questions






More from Askalon

Visit us at:

Askalon på Facebook Askalon på LinkedIn Askalon på Instagram

Askalon AB, Nolgårdsvägen 11, SE-663 41 Hammarö, Sweden

Phone. +46 54-57 92 00, Email: sales@askalon.se

Hammarö | Landskrona | Västervik | Søborg | Pirkkala | Sipoo

© 2024 Askalon AB