Phone. +46 54-57 92 00
Email: sales@askalon.se

About AskalonCareerNewsContact

Askalon AB
På Dansk In English Suomeksi På Svenska

Home/Products/VAG ZETA-XL with handwheel - wastewater

VAG ZETA-XL with handwheel - wastewater

VAG ZETA-XL with handwheel - wastewater

VAG ZETA®-XL is a resilient-seated knife-gate valve in fully flanged design, sealing in both flow directions, with integrated scraper system and free flow passage. Operation via handwheel. The enlarged bottom seal and the metallic limit stop of the knife in the body ensure perfect tightness. Suitable for use as shut-off valve in waste-water applications, in dams, in power plants and in industry.

PN: 10 - DN: 700...1400

Downloads
Technical datasheet
Operating and maintenance instructions
Drawings ZETA®_DN_500-1000_DWG
Drawings ZETA®_DN_600-1000_DXF
Drawings ZETA®_HR_DN_1200-1400_DWG

VAG WATER & SEVAGE

Any questions?

Fredrik Ekeroth
Solution Seller
Phone. +46 54-57 92 06

Fredrik.Ekeroth@askalon.se

Fredrik Malmström
Solution Seller
Phone. +46 40-33 02 33

Fredrik.Malmstrom@askalon.se

Johan Mattsson
Account Manager Infrastructure
Phone. +46 54-57 92 52

Johan.Mattsson@askalon.se

Frank Kirk Hansen
Account Manager
Phone. +45 4053 6511

Frank.Kirk@askalon.dk

Kenn Gerwien
Account Manager
Phone. +45 2346 5513

Kenn.Gerwien@askalon.dk

  • Face-to-face length: acc. to EN 558, basic series 20 (DIN 3202 / K1)
  • With flange end acc. to EN 1092-2, PN 10
  • Full-flange design, both as wafer type and for pipeline end installation, without additional counter flange at full differential pressure
  • Full-flange design with unrestricted flow passage
  • Leakproof from both flow directions
  • Specially shaped horizontal sealing with double quad ring profile and integrated PTFE sliding rails for reducing operation forces
  • Horizontal and axial guiding of the knife on flexible plastic sliding rails
  • Horizontal sealing adjustable during operation and replaceable with the valve installed in the pipeline
  • Scraper installed on both sides of the plate to clean the knife
  • Handwheel version with AUMA bevel gearbox GK (type A for rising stem)
  • Cast iron parts: Epoxy coated
  • Operating kit: With handwheel
  • Stem: Stainless steel 1.4021
  • Body parts, bearing plate and gland: Cast iron EN-GJL-250 (GG-25)
  • Knife: Stainless steel A2
  • U-sealing and horizontal sealing: Elastomer (NBR)
  • All connecting parts: stainless steel A2 (DIN EN ISO 3506)
  • Yoke and sheet metal covering: Stainless steel A2

Questions about the product?

Fill out the form below and we will contact you with answers to your questions






More from Askalon

Visit us at:

Askalon på Facebook Askalon på LinkedIn Askalon på Instagram

Askalon AB, Nolgårdsvägen 11, SE-663 41 Hammarö, Sweden

Phone. +46 54-57 92 00, Email: sales@askalon.se

Hammarö | Landskrona | Västervik | Søborg | Pirkkala | Sipoo

© 2024 Askalon AB