Phone. +46 54-57 92 00
Email: sales@askalon.se

About AskalonCareerNewsContact

Askalon AB
På Dansk In English Suomeksi På Svenska

Home/Products/VAG ZETA-XL with handwheel - wastewater

VAG ZETA-XL with handwheel - wastewater

VAG ZETA-XL with handwheel - wastewater

VAG ZETA®-XL is a resilient-seated knife-gate valve in fully flanged design, sealing in both flow directions, with integrated scraper system and free flow passage. Operation via handwheel. The enlarged bottom seal and the metallic limit stop of the knife in the body ensure perfect tightness. Suitable for use as shut-off valve in waste-water applications, in dams, in power plants and in industry.

PN: 10 - DN: 50...600

Downloads
Technical datasheet
Operating and maintenance instructions
Drawings ZETA®_DN_50-100_DWG
Drawings ZETA®_DN_50-250_DXF
Drawings ZETA®_DN_150-400_DWG
Drawings ZETA®_DN_300-500_DXF
Drawings ZETA®_DN_500-1000_DWG
Drawings ZETA®_DN_600-1000_DXF

VAG WATER & SEVAGE

Any questions?

Fredrik Ekeroth
Solution Seller
Phone. +46 54-57 92 06

Fredrik.Ekeroth@askalon.se

Fredrik Malmström
Solution Seller
Phone. +46 40-33 02 33

Fredrik.Malmstrom@askalon.se

Johan Mattsson
Account Manager Infrastructure
Phone. +46 54-57 92 52

Johan.Mattsson@askalon.se

Frank Kirk Hansen
Account Manager
Phone. +45 4053 6511

Frank.Kirk@askalon.dk

Kenn Gerwien
Account Manager
Phone. +45 2346 5513

Kenn.Gerwien@askalon.dk

  • Face-to-face length: acc. to EN 558, basic series 20 (DIN 3202 / K1)
  • With flange end acc. to EN 1092-2, PN 10
  • Full-flange design, both as wafer type and for pipeline end installation, without additional counter flange at full differential pressure
  • Full-flange design with unrestricted flow passage
  • Leakproof from both flow directions
  • Horizontal sealing adjustable during operation and replaceable with the valve installed in the pipeline
  • Scraper installed on both sides of the plate to clean the knife
  • Cast iron parts: Epoxy coated
  • Operating kit: With handwheel
  • Stem: Stainless steel 1.4021
  • Stem nut: Brass
  • Body parts, bearing plate and gland: Cast iron EN-GJL-250 (GG-25)
  • Knife: Stainless steel A2
  • U-sealing and horizontal sealing: Elastomer (NBR)
  • Yoke - sheet metal construction: Stainless steel A2
  • All connecting parts: stainless steel A2 (DIN EN ISO 3506)

Questions about the product?

Fill out the form below and we will contact you with answers to your questions






More from Askalon

Visit us at:

Askalon på Facebook Askalon på LinkedIn Askalon på Instagram

Askalon AB, Nolgårdsvägen 11, SE-663 41 Hammarö, Sweden

Phone. +46 54-57 92 00, Email: sales@askalon.se

Hammarö | Landskrona | Västervik | Søborg | Pirkkala | Sipoo

© 2024 Askalon AB