Phone. +46 54-57 92 00
Email: sales@askalon.se

About AskalonCareerNewsContact

Askalon AB
På Dansk In English Suomeksi På Svenska

Home/Products/VAG ZETA with electric actuator - wastewater

VAG ZETA with electric actuator - wastewater

VAG ZETA with electric actuator - wastewater

VAG ZETA® is a resilient-seated knife-gate valve in fully flanged design, sealing in both flow directions, with integrated scraper system and free flow passage with control orifice for precise regulation. Due to the integrated stainless-steel control orifice with optimised control characteristic and free bottom passage, this valve can be used as a control valve. Suitable for use in waste-water applications, in power plants and in industry.

PN: 10 - DN: 100...600

Downloads
Technical datasheet
Operating and maintenance instructions

VAG WATER & SEVAGE

Any questions?

Fredrik Ekeroth
Solution Seller
Phone. +46 54-57 92 06

Fredrik.Ekeroth@askalon.se

Fredrik Malmström
Solution Seller
Phone. +46 40-33 02 33

Fredrik.Malmstrom@askalon.se

Johan Mattsson
Account Manager Infrastructure
Phone. +46 54-57 92 52

Johan.Mattsson@askalon.se

Frank Kirk Hansen
Account Manager
Phone. +45 4053 6511

Frank.Kirk@askalon.dk

Kenn Gerwien
Account Manager
Phone. +45 2346 5513

Kenn.Gerwien@askalon.dk

  • Face-to-face length: acc. to EN 558, basic series 20 (DIN 3202 / K1)
  • With flange end acc. to EN 1092-2, PN 10
  • Full-flange design, both as wafer type and for pipeline end installation, without additional counter flange at full differential pressure
  • Any installation position possible
  • With integrated VAG waste water control insert
  • Horizontal sealing adjustable during operation and replaceable with the valve installed in the pipeline
  • Leakproof from both flow directions
  • Scraper installed on both sides of the plate to clean the knife
  • With mechanical position indicator of the knife
  • Cast iron parts: Epoxy coated
  • Operating kit: With electric actuator
  • Stem: Stainless steel 1.4057 (DN 50-350)/stainless steel 1.4021 (DN 400-600)
  • Body parts, bearing plate and gland: Cast iron EN-GJL-250 (GG-25)
  • U-sealing and horizontal sealing: Elastomer (NBR)
  • Yoke - sheet metal construction: Stainless steel A2
  • Control insert: Stainless steel A4
  • All connecting parts: stainless steel A2 (DIN EN ISO 3506)

Questions about the product?

Fill out the form below and we will contact you with answers to your questions






More from Askalon

Visit us at:

Askalon på Facebook Askalon på LinkedIn Askalon på Instagram

Askalon AB, Nolgårdsvägen 11, SE-663 41 Hammarö, Sweden

Phone. +46 54-57 92 00, Email: sales@askalon.se

Hammarö | Landskrona | Västervik | Søborg | Pirkkala | Sipoo

© 2024 Askalon AB