Home/Produkter/VAG ZETA-XL with handwheel - wastewater

VAG ZETA-XL with handwheel - wastewater

VAG ZETA®-XL is a resilient-seated knife-gate valve in fully flanged design, sealing in both flow directions, with integrated scraper system and free flow passage. Operation via handwheel. The enlarged bottom seal and the metallic limit stop of the knife in the body ensure perfect tightness. Suitable for use as shut-off valve in waste-water applications, in dams, in power plants and in industry.

PN: 10 - DN: 50...600

Downloads
Technical datasheet
Operating and maintenance instructions
Drawings ZETA®_DN_50-100_DWG
Drawings ZETA®_DN_50-250_DXF
Drawings ZETA®_DN_150-400_DWG
Drawings ZETA®_DN_300-500_DXF
Drawings ZETA®_DN_500-1000_DWG
Drawings ZETA®_DN_600-1000_DXF

VAG VAND & SPILEVAND

Any questions?

Frank Kirk Hansen
Area Account Manager West
Phone. 4053 6511

Frank.Kirk@askalon.dk

Kenn Gerwien
Area Account Manager East
Phone. 2346 5513

Kenn.Gerwien@askalon.dk

Characteristics
Material
Anticorrosive
Product request

Face-to-face length: acc. to EN 558, basic series 20 (DIN 3202 / K1)
With flange end acc. to EN 1092-2, PN 10
Full-flange design, both as wafer type and for pipeline end installation, without additional counter flange at full differential pressure
Full-flange design with unrestricted flow passage
Leakproof from both flow directions
Horizontal sealing adjustable during operation and replaceable with the valve installed in the pipeline
Scraper installed on both sides of the plate to clean the knife

Operating kit: With handwheel
Stem: Stainless steel 1.4021
Stem nut: Brass
Body parts, bearing plate and gland: Cast iron EN-GJL-250 (GG-25)
Knife: Stainless steel A2
U-sealing and horizontal sealing: Elastomer (NBR)
Yoke - sheet metal construction: Stainless steel A2
All connecting parts: stainless steel A2 (DIN EN ISO 3506)

Cast iron parts: Epoxy coated

Brands

VAG ZETA-XL with handwheel - wastewater

Questions about the product?