Home/Produkter/VAG ZETA with electric actuator - wastewater

VAG ZETA with electric actuator - wastewater

VAG ZETA® is a resilient-seated knife-gate valve in fully flanged design, sealing in both flow directions, with integrated scraper system and free flow passage with control orifice for precise regulation. Due to the integrated stainless-steel control orifice with optimised control characteristic and free bottom passage, this valve can be used as a control valve. Suitable for use in waste-water applications, in power plants and in industry.

PN: 10 - DN: 100...600

Downloads
Technical datasheet
Operating and maintenance instructions

VAG VAND & SPILEVAND

Any questions?

Frank Kirk Hansen
Area Account Manager West
Phone. 4053 6511

Frank.Kirk@askalon.dk

Kenn Gerwien
Area Account Manager East
Phone. 2346 5513

Kenn.Gerwien@askalon.dk

Characteristics
Material
Anticorrosive
Product request

Face-to-face length: acc. to EN 558, basic series 20 (DIN 3202 / K1)
With flange end acc. to EN 1092-2, PN 10
Full-flange design, both as wafer type and for pipeline end installation, without additional counter flange at full differential pressure
Any installation position possible
With integrated VAG waste water control insert
Horizontal sealing adjustable during operation and replaceable with the valve installed in the pipeline
Leakproof from both flow directions
Scraper installed on both sides of the plate to clean the knife
With mechanical position indicator of the knife

Operating kit: With electric actuator
Stem: Stainless steel 1.4057 (DN 50-350)/stainless steel 1.4021 (DN 400-600)
Body parts, bearing plate and gland: Cast iron EN-GJL-250 (GG-25)
U-sealing and horizontal sealing: Elastomer (NBR)
Yoke - sheet metal construction: Stainless steel A2
Control insert: Stainless steel A4
All connecting parts: stainless steel A2 (DIN EN ISO 3506)

Cast iron parts: Epoxy coated

Brands

VAG ZETA with electric actuator - wastewater

Questions about the product?