Home/Produkter/VAG EKN M epoxy - water

VAG EKN M epoxy - water

VAG EKN® M is a double-offset flanged butterfly valve (resilient-seated) with epoxy coating, available with long or short face-to-face length or made of welded steel for use in water applications. Long service life, as the medium does not come into contact with the bearing, and due to the wear-resistant, corrosion- and infiltration-proof seat with weld overlay. Suitable for use in water distribution, water treatment, in pretreated waste water, dams, in power plants, industry and in pressure management.

PN: 6/10/16/25/40 - DN: 100...4000

Downloads
Technical datasheet
Operation and maintenance instructions
Drawings DN150-1200_DXF
Drawings DN1300-3000_DXF
Spare part list DN150...300
Spare part list DN350...450
Spare part list DN500...600
Spare part list DN700...800
Spare part list DN900
Spare part list DN1000

ENERGI & KRAFT KERNEKRAFT VAG VAND & SPILEVAND

Any questions?

Frank Kirk Hansen
Account Manager
Phone. 4053 6511

Frank.Kirk@askalon.dk

Kenn Gerwien
Account Manager
Phone. 2346 5513

Kenn.Gerwien@askalon.dk

Specifikationer
Material
Product request

Sealing system/standard: Resilient seated in accordance with EN 593
Face-to-face length: acc. to EN 558, basic series 14 (DIN 3202, F4)
With flange ends on both sides acc. to EN 1092-2
Double-offset disk bearing mounted in maintenance-free bushing
Medium free bearing (dry shaft) in body by means of double O-ring sealing and closed disk eyes
Wear-resistant, corrosion-resistant and undermining-resistant seat
Possible to replace profile sealing ring without disassembling the disk
Automatic sealing system with enclosed and pressure-supported profile sealing ring
Vacuum tight up to 1 Torr
Tight in both flow directions acc. EN 12266
With self-locking, fully enclosed, maintenance-free worm gear including mechanical position indicator

O-rings: EPDM
Body: Ductile iron EN-GJS-400-15 (GGG-40)
Valve sealing: EPDM (for PN 40 polyurethane)
Disk: Ductile iron EN-GJS-400-15 (GGG-40) (exception: DN 100 / DN 125 stainless steel 1.4408)
Butterfly valve stem: Stainless steel 1.4021
Seat: High-alloy weld overlay
Body: Internally and externally epoxy coated acc. to GSK guidelines
Disk: Epoxy coated according to GSK guidelines (exception: DN 100 / DN 125 stainless steel)

Brands

VAG EKN M epoxy - water

Questions about the product?