Fisher trykaflastnings regulator MR108

Fisher trykaflastnings regulator MR108

Fisher™ type MR108 modtryks regulator er en direkt virkende, høj-kapacitet, multi-formåls regulator. De er designet til at håndtere tryk op til 400 psig (27,6 bar) og temperaturer op til 250°F (121°C). De tilvirker pålidelig og økonomisk kontrol af forskellige strømninger som væske, luft og gas. Applikationer der inkluderer smøre olie og andre applikationer hvor hastighed er kritisk, minimum differents tryk er en bekymring eller hvor væske ikke er uden urenheder.

Any questions?

Anders Praem
Inside Sales Engineer
Phone. 2137 7759

Anders.Praem@askalon.dk

Frank Kirk Hansen
Area Account Manager West
Phone. 4053 6511

Frank.Kirk@askalon.dk

Pressure Registration External
Temperature Capabilities Nitrile (NBR): -20 to 180°F / -29 to 82°C | Fluorocarbon (FKM): 20 to 250°F / -7 to 121°C; limited to 200°F / 93°C in hot water | Ethylene Propylene (EPDM): -20 to 225°F / -29 to 107°C
Body Sizes NPS 1 / 2 / 3 / 4 | DN 25 / 50 / 80 / 100
End Connections NPT / CL125FF / CL150RF / CL250RF / CL300RF / CL600RF / PN 16/25/40
Maximum Inlet Pressure 400 PSIG / 27.6 bar | Or body rating limit, whichever is lower
Maximum Outlet Pressure 400 PSIG / 27.6 bar | Or body rating limit, whichever is lower
Spring Ranges 5 to 300 PSIG / 0.4 to 20.7 bar
  • Steel and Stainless Steel Constructions Meet API 614 Requirements
  • Available Constructions to Meet NACE MR0175-2003 and NACE MR0103 Requirements for Sour Gas Service Capability
  • P1 = P2 on High-Pressure Actuator
  • Drain Valve
  • Pressure-Loaded Actuator
  • Bleed valve (for High-Pressure Actuator only)
  • Travel Indicator

Questions about the product?

Fill out the form below and we will contact you with answers to your questions